CXFR11 series Electronic flow sensor, also known as differential thermal flow sensor and Thermal flow sensor. The set range can be 1-20m/s. Have relay output (230VAC. 4A) and 4-20mA output. Suitable for different kinds fluid. Concise and direct indicator, and with high reliable.
Feature
1, No movable parts.
2, Maintenance free.
3, Easy installation.
4, Suitable for variable diameter demand.
5, Switching value can be adjusted continuously.
6, Extremely low pressure loss.
7, Compact structure.
8, LED indicator display flow trend and switch state.
Technical data
1. Set range: 1^150cm/s( water), 3^300cm/s(oil), 20^2000cm/s(air)
2. Output: PNP, NPN, Relay, NO+NC (SPDT)
3. Power supply: 24V± 20%DC or 230V± 15%AC
4. Switching Current: Max. 400mA(PNP or NPN type ), Max. 4A( Relay type )
5. Unload current: Max. 80mA
6. Flow indicator: LED (6)
7. Set type: Potentiometer set
8. Proof Pressure range: 100bar
9. Temperature gradient: 4 C/s
10. Response time: 1--13s, standard is 2s
11. Initialization time: 8s
12. Electrical protection: Reversed-phase, short circuit, overload protection
13. Protection class: IP67
14. Medium temperature: -20--80C
15. Environment temperature: -20--80C
16. Storage temperature: -20--100C
17. Connection: M12 connector /2m cable (option)
18. Material: Probe is stainless steel. Housing is PBT.
19. Weight: 0.4kg
Most Accurate Control By Electronic Thermal Mass Water Flow Switch
-----------We are gold supplier in 9 consecutive years
CX-FS series Electronic thermal mass flow switch , also known as differential thermal flow sensor and Thermal flow sensor . The set range can be 1-20m/s . Have relay output (230VAC.4A). Suitable for different kinds fluid .Concise and direct indicator ,and with high reliable .
The Principle of electronic thermal mass flow switch based on the principle of thermal theory, there are two resistances in the closed probe . One resistance was heated and regarded as detected resistance , the other one was heated and regarded as standard resistance . When the medium is flowing ,the heat on the heated resistance will be taken away and the resistances' value will be changed . The differential resistances value is the basis of determining the flow velocity .
Application:
gaseous /liquid
The flow switch for ground-source heat-pump is mainly applicable to industrial automation/mechanical equipment/air compressing industry/ refrigeration and air-conditioner. The magnet not contact with flowing water, so can normally work in sewage discharging system.
CX-FS-FB Paddle Flow Switch |
| Diameter |
DN25…DN150 |
| Set range |
20…1800L/min(water) |
| Repeatability |
±2.5%FS |
| Connection |
terminal type |
| Output |
Mechanical switch NO+NC(250VAC,3A) |
| Pressure proof |
16 bar |
| Average pressure loss: |
0.08bar( at max.flow rate) |
| Ambient temperature |
-25…80C |
| Medium temperature |
0…90C |
| Interface screw |
G1"pipe screw |
| Protective class |
IP33 |
| Weight |
0.55kg |
| Material |
Main body |
stainless steel |
| Process connection: |
brass |
| Connection rod |
brass |
| Baffle |
stainless steel |
| Seal |
NBR |
| Housing |
ABS |
| CX-FS-FB12 Baffle Flow Switch |
| Repeatability |
±2.5%FS |
| Connection |
terminal type |
| Output |
Mechanical switch NO+NC(250VAC,3A) |
| Pressure proof |
16 bar |
| Average pressure loss: |
0.08bar( at max.flow rate) |
| Ambient temperature |
-25…80ºC |
| Medium temperature |
0…90ºC |
| Interface screw |
G1"pipe screw |
| Protective class |
IP33 |
| Weight |
0.85kg |
| Material |
Main body |
stainless steel |
| Process connection: |
brass |
| Connection rod |
brass |
| Baffle |
brass |
| Seal |
NBR |
| Housing |
ABS |
| CX-FS-FPD20 Pointer display type piston flow switch |
| Medium |
liquid or gas |
| Repeatability |
≤±3%full scale |
| Pressure |
200bar(stainless steel type)100bar(brass type) |
| Output |
normally open output |
| Contact capacity |
240VAC / 110VDC 1.5A |
| Ambient temperature |
-20…70ºC |
| Medium temperature |
0…70ºC |
| Protection |
IP65 |
| Outlet |
M12*1 |
| Material |
Electronic body |
PC |
| Switch body |
stainless steel / brass nickel plating |
| Spring |
stainless steel |
| CX-FS-FR11 Electronic Flow Sensor |
| Set range |
1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air) |
| Output |
PNP, NPN, Relay ,4-20mA, NO+NC (SPDT) |
| Power supply |
24V±20%DC or 230V±15%AC |
| Switching Current |
Max.400mA(PNP or NPN type ), Max.4A( Relay type ) |
| Unload current |
Max.80mA |
| Flow indicator |
LED (6) |
| Set type |
potentiometer set |
| Proof Pressure range |
100bar |
| Temperature gradient |
4ºC/s |
| Response time |
1--13s,standard is 2s |
| Initialization time |
8s |
| Electrical protection |
reversed-phase ,short circuit ,overload protection |
| Protection class |
IP67 |
| Medium temperature |
20--80ºC |
| Environment temperature |
-20--80ºC |
| Storage temperature |
-20--100ºC |
| Connection |
M12 connector /2m cable (option) |
| Material |
Probe is stainless steel . Housing is PBT |
| Weight |
0.4kg |
| CX-FR-FR12 Electronic flow switch |
| Set range |
1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air) |
| Output |
PNP, NPN, Relay ,4-20mA, NO+NC (SPDT) |
| Power supply |
24V±20%DC |
| Switching Current |
Max.400mA(PNP or NPN type ), Max.4A( Relay type ) |
| Unload current |
Max.80mA |
| Flow indicator |
LED (6) |
| Set type |
potentiometer set |
| Proof Pressure range |
100bar |
| Temperature gradient |
4ºC/s |
| Response time |
1--13s,standard is 2s |
| Initialization time |
8s |
| Electrical protection |
reversed-phase ,short circuit ,overload protection |
| Protection class |
IP67 |
| Medium temperature |
20--80ºC |
| Environment temperature |
-20--80ºC |
| Storage temperature |
-20--100ºC |
| Connection |
M12 connector /2m cable (option) |
| Material |
Probe is stainless steel . Housing is PBT |
| Model |
Connection |
Notes |
Accuracy |
| HFS-25 |
1″-11½NPT Screw |
Red Case |
5% |
| HFS-20 |
¾″-14NPT Screw |
| HFS-15 |
½″-14NPT Screw |
| JYF-25 |
1″-11½NPT Screw |
White Case |
2-3% |
| JYF-20 |
¾″-14NPT Screw |
| JYF-15 |
½″-14NPT Screw |
| Rated Voltage?Rated Amps |
A.C.125~250V |
Power(Cosmp.) |
|
| Non-inductive Current |
12A |
1 |
|
| Full Load |
12A |
0.75 |
|
| Locked Roter |
72A |
0.45 |
|
| Required Flow for actuating switch (m3/h) |
|
| Pipe size (in) |
1 |
1-¼ |
1-½ |
2 |
2-½ |
3 |
4 |
5 |
6 |
8 |
|
Min.
Flow |
Flow lower,1-2 closed |
1 |
1.3 |
1.7 |
3.1 |
4.1 |
6.2 |
8.4 |
12.9 |
16.8 |
46.6 |
|
| Flow lower,1-3 closed |
0.6 |
0.8 |
1.1 |
2.2 |
2.8 |
4.3 |
6.1 |
9.3 |
12.3 |
38.6 |
|
Max.
Flow |
Flow lower,1-2 closed |
2 |
3 |
4.4 |
6.6 |
7.8 |
12 |
18.4 |
26.8 |
32.7 |
94.2 |
|
| Flow lower,1-3 closed |
1.9 |
2.8 |
4.1 |
6.1 |
7.3 |
11.4 |
17.3 |
25.2 |
30.7 |
90.8 |
|
|
|
| |
|
| |
|
| |
|
Fornecedor Auditado 
