Dreambox-500S Receptor de Satélite

SOFT REMINDER:
If you have no requirement, English will be setting as the defualt language for menu.

GENERAL DESCRIPTION:
Dreambox DM 500S is the first Linux based DVB Receiver.
This receiver runs on open-source software developed by hundreds of developers around the world.
You can attach this unit to your Windows based network at home and record your favourite TV programs right into your hard drive.

MAIN FEATURE OF THE DEVICE:
1)250 MHz IBM PowerPC Processor (350 Mips)
2)Linux Operating System
3)1 x Smartcard-Reader
4)MPEG2 Hardware decoding
5)100Mbit full duplex Ethernet Interface
6)2 LED status
7)unlimited channel lists for TV/Radio
8)channel-change time < 1 second
9)full automatic service scan
10)supports directly bouquet-lists (indirect unlimited)
11)supports EPG (electronic program guide)
13)fully adaptable OSD in many languages (skin-support)
14)SPDI/F Interface for digital bit stream out (AC-3 / DTS)
15)1 x Scart-interfaces (fully controlled by software)

TECHNICAL SPECIFICATION:
DBC-Tuner:
Frequency Range 5 to 858 MHz
Input Impedance 75 Ohm
Input Symbol rate 1 to 6.9 Mbaud/s

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4: 3 / 16: 9
Footage 16: 9, automatic assimilation for 16: 9 TV-Device (over Scart)
Letterbox precolating for 4: 3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 KHz, 44.1 KHz, 48 KHz, 16 KHz, 22.05 KHz, 24 KHz

Output analog:
Output Level L/R 0, 5 Vss on 600 Ohm
THD > 60 dB (1 KHz)
Crosstalk < -65 dB

Output digital:
Output Level 0, 5 Vss on 75 Ohm
Sampled Data Filtering 32 KHz, 44.1 KHz, 48 KHz
S/PDIF-Output optical (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-VHS over OSD selectable

Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115, 2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming

Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming

LNB Power and polarisation:
LNB Current 500mA max.; Short-circuit-proof
LNB Voltage vertical < 14V without load, > 11, 5V at 400mA
LNB Voltage horizontal < 20V without load, > 17, 3V at 400mA
LNB shut-off at Standby-Mode

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Power consumption: < 10W / 12V
Input voltage: DC12V, alternating acurrent +/- 15%

Extern power supply:
Input: 110-240V AC / 50-60Hz / 0, 6A
Output: 12V = / 1A
Others:
Ambient Temperature 15 to 35 centigrade
Humidity < 80%

PACKING:
Gift box: 30*20*10CM
Weight: 1.6kg ( 2kg/when with protection box )
1x User Manual
1x Remote Controller
1x Dreambox-500 satellite receiver
Related Accessories ( Power adapter & Cables )