Mensagem Self-Programmable ventilador (F023)

Self-programmable message fan

Novel breeze turning-on design great for company gift, commercial gift, and party fan works once button pressed.
Can self-programed English letters, numbers & signs. It can show 6 different messages as fan works.
Can do silkscreen print, print LOGO.

Instruction:
1. Insert 3 x AA batteries in correct position.
2. Press On/Off switch(Button A) to turn on the fan.
3. While the fan is spinning, press and hold the middle key(Button C)for 2 seconds to start the setup. When the cursor starts blinking, you may begin entering your message.
4. Press the top key(Button B)to toggle through letters.
5. Press the bottom key(Button D) to toggle through symbols.
6. To enter spaces, press the middle key(Button C).
7. To finish setup, press the hold the middle key for 2seconds until the cursor stops blinking.
8. To program another message, press the middle key once (Button C) while the fan is spinning to switch to the next page. Repeat steps 3-7. You can program up to four messages.
9. To alternate between the four messages, press the middle key(Button C) once. To erase all four messages, remove the batteries.
10. When battery power is low, messages may not display properly. Replace batteries as needed.

Note:
1. Before replacing the battery must first turn off the power switch on the fan, or edit the content of your own will be lost,
And to ensure that within 3 minutes to replace the battery, or you will lose your edits
2. The content can be edited:
Alphabet: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Symbols:
+ - x / = *! $ & @ # &? , . '; : " "( ) %
0123456789
(""is space)


Certificates: CE, RoHS, EN71, ASTM.