Costumização: | Disponível |
---|---|
Serviço pós-venda: | a instalação e a colocação em funcionamento fornecem acessórios |
Rating impermeável: | IPX-5 |
Fornecedores com licênças comerciais verificadas
Auditado por uma agência de inspeção terceirizada independente
Steel Pipe Welding on Line Precision Cold Saw Cutting Machine
Equipment parameters:
Mechanical part:
Cutting steel pipe material: hot-rolled and cold-rolled low carbon steel Q235, Q195
Product range: round tube, square tube, rectangular tube.
The mobile car is equipped with a guide roller in front of the saw blade, and a supporting roller behind the fixture;
Adopting imported linear guide rails, equipped with small car safety buffers on both sides, the fixture adopts pneumatic or hydraulic clamping mechanisms: using 2 sets of clamping devices;
The inlet end is tapered to prevent scratching of the steel pipe;
Equipped with adjustable cooling spray pipeline to flush impurities and iron filings on saw blades and clamping blocks;
Sawing method: divided into 5 sections, with changes in speed and feed rate;
All pipelines in the mechanical equipment meet the following requirements:
the tank drag chain is wide enough to ensure sufficient internal space; There are multiple isolation strips inside the tank drag chain, separating oil pipes, line pipes, water pipes, etc;
Electronic control system:
We use well-known brand control systems and electrical components, with one operating console and one control cabinet. The control cabinet is equipped with a warning light as a fault alarm. The LCD touch screen displays operating parameters and can store 16 sets of specification data; Able to easily set the cutting length of welded pipes according to the product. Reserve interlocking and interlock protection interfaces with the host. The equipment has both manual and automatic functions, and its actions and status should be indicated accordingly. The system is stable and reliable, with complete protection and safety functions.
Cold saw parameters:
Model A:
Cutting saws models: | Ø20 |
Cutting range: | Ø12- Ø 25 |
Speed: | 100m/min |
Material: | plain carbon steel |
Cutting length: | 1500mm-12000mm |
Clamping method: | start/hydraulic |
Fixed length tolerance: | 1.0 ± |
Cut burr: | ≤ 0.2 |
Model B:
Cutting saws models: | Ø32 |
Cutting range: | Ø15- Ø 50 |
Speed: | 100m/min |
Material: | plain carbon steel |
Cutting length: | 1500mm-12000mm |
Clamping method: | start/hydraulic |
Fixed length tolerance: | 1.0 ± |
Cut burr: | ≤ 0.2 |
Model C:
Cutting saws models: | Ø50 |
Cutting range: | Ø20- Ø 65 |
Speed: | 100m/min |
Material: | plain carbon steel |
Cutting length: | 1500mm-12000mm |
Clamping method: | start/hydraulic |
Fixed length tolerance: | 1.0 ± |
Cut burr: | ≤ 0.2 |
Model D:
Cutting saws models: | Ø60 |
Cutting range: | Ø25- Ø 76 |
Speed: | 80m/min |
Material: | plain carbon steel |
Cutting length: | 1500mm-12000mm |
Clamping method: | start/hydraulic |
Fixed length tolerance: | 1.0 ± |
Cut burr: | ≤ 0.2 |
Model E:
Cutting saws models: | Ø76 |
Cutting range: | Ø32- Ø 89 |
Speed: | 70m/min |
Material: | plain carbon steel |
Cutting length: | 1500mm-12000mm |
Clamping method: | start/hydraulic |
Fixed length tolerance: | 1.0 ± |
Cut burr: | ≤ 0.2 |
Model F:
Cutting saws models: | Ø89 |
Cutting range: | Ø38- Ø 100 |
Speed: | 60m/min |
Material: | plain carbon steel |
Cutting length: | 1500mm-12000mm |
Clamping method: | start/hydraulic |
Fixed length tolerance: | 1.0 ± |
Cut burr: | ≤ 0.2 |
Model G:
Cutting saws models: | Ø114 |
Cutting range: | Ø60-1 Ø 20 |
Speed: | 40m/min |
Material: | plain carbon steel |
Cutting length: | 1500mm-12000mm |
Clamping method: | start/hydraulic |
Fixed length tolerance: | 1.0 ± |
Cut burr: | ≤ 0.2 |
Model H:
Cutting saws models: | Ø127 |
Cutting range: | Ø65- Ø 140 |
Speed: | 40m/min |
Material: | plain carbon steel |
Cutting length: | 1500mm-12000mm |
Clamping method: | start/hydraulic |
Fixed length tolerance: | 1.0 ± |
Cut burr: | ≤ 0.2 |
Wuxi Sunraise Heavy Industry Technology Co., Ltd. is located at Wuxi city, JiangSu Province.Our company is one professional manufacturer which provide various of Magnetic Bar,Cutter Blade,Cold Cutting Saw,High Frequency Welder.We have progressive equipments , independent research and develop department, can produce different kinds of blades as customization.
Our goods with high quality, best seller at Southeast Asia, the Middle East, Europe, USA, South America etc.We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. We're pleased to get your Inquiry and we will reply you as soon as possible.
Shipping & Payment:
FAQ:
Q1:Can you print the company name or logo on the products?
A1:Yes. yes. We can print your logo or company name on the product.
Q2:When is your company delivery time?
A2:Our delivery time is within 15 days , It depend on your quantity.
Q3:How many workers will need to operate the machine?
A3: A3: If a worker knows how to operate a machine, then a worker can operate it.
Q4: How long does it take to replace the saw blade on the machine?
A4: A worker needs to replace it, which takes about 15 minutes, but it depends on whether the worker has sufficient familiarity.
Q 5: Can your machine ensure the accuracy of pipe cutting?
A5: Yes, our machine components use excellent CNC, and we ensure the accuracy of pipe cutting. We also tested the machine before delivery.
Q6: How do we obtain after-sales service for machines?
A6: We will provide technical support for installation, operation, and maintenance. If necessary, we can also arrange for technical engineers to come to your company.
Any questions, please send us message freely!