China Factory 300ml Wholesale Clear Silicone Sealant Fast Cure Acetic Silicone Sealant

• Serviço pós-venda: garantia
• Tipo: Selante de Silicone
• Seal Tape Tipo: Tape Líquido
• Seal o uso de fitas: Tubulação de gás, Engenharia, Combate a Incêndios Pipeline, Canalizações
• Material: Metal
• Estado: Fluid
• N ° de Modelo.: JB-7132
• Míldio prova: Míldio Proof
• Bonding materiais: Vidro
• modelo n.º: vidro
• prazo de validade: 12 meses
• certificado: iso9001, iso14001, bv
• marca comercial: dow corning
• temperatura de armazenamento: 0~27
• fórmula: (ch3) 3sio (ch3) 2sionsi (ch3) 3
• einecs: 230-391-5
• no cas: 7085-85-0
• nome: vedante de silicone
• cura: cura acético
• cor: preto, branco, cinzento, cor oem
• utilização: vidro, alumínio, tanque de peixe, uso geral
• preço: competitivo
• factroy: junta
• prazo de pagamento: tt, l/c, paypal
• Pacote de Transporte: by Drum; by Cartridge
• Especificação: 200L; 300ml; 280ml
• Marca Registrada: OEM
• Origem: China
• Código HS: 321410900
• Capacidade de Produção: 10000tons/Year

Descrição de Produto

China Factory 300ml Wholesale Clear Silicone Sealant Fast Cure Acetic Silicone Sealant  

Features:
One-component room temperature curing acetoxy,easy to use.In the temperature range 4-40ºC's has good extrusion and thixotropy. For
most materials have good adhesive roperties.Excellent weather resistance and high temperature performance,is the ideal weather sealing

Directions:
Must use a solvent such as toluene or acetone,at the interface clean and keep dry.Construction of application of sealant to
completely fill the joints to ensure that both sides of bonding.They needs to protect the side labeled tape,but not touch the tape
will be the construction surface.The plastic is not cured prior to trimming immediately in order to achieve a beautiful look.

Cautions:
1.Not available in all surface leaking grease,plasticize or solvents.
2.Difficult for enclose spaces or in direct contact with the surface of the food or drinking water.
3.The substrate surface temperature is below 4ºCor over 40ºC not construction.Should not adhered copper or copper alloy material.

Test Item	Unit	Actual results
Appearance		Smooth, no air bubbles, no lumps
Tack free time(at what % humidity)	min	5
Slump	mm	0
Extrusion	ml/min	1483
Shore A hardness /72h		27
Weight loss		4%
Cracking		No
Chalking		No
Tensile adhesion	Mpa	0.6
Elongation at break	%	316
Specific gravity	g/cm3	1
Completely dry	hours	16
Temperature Resistence	°C	-50ºC~150ºC
Key Words		Acetic Silicone Sealant