UV Resistant Glass Bonding Sealant Sealing Building Material Acetic Glass Sealant

• Bonding Função: Adesivo estrutural
• Aplicação: Construção
• Material: Silicone
• Característica: Impermeável
• Composição: Matéria Orgânica
• modelo n.º: jb7132
• N ° de Modelo.: JB7132
• prazo de validade: 12 meses
• certificado: iso9001, iso14001, bv
• oem: sim
• temperatura de armazenamento: 0~27
• cartucho: 300 ml
• no cas: 7085-85-0
• cura: cura ácida
• utilização: vidro
• factroy: junta
• Pacote de Transporte: by Drum/ by Cartridge
• Especificação: 300ml/280ml
• Marca Registrada: oem
• Origem: China
• Código HS: 321410900
• Capacidade de Produção: 10000tons/Year

Descrição de Produto

Junbond JB7132 Acetic Glass Sealant



 

Product Feature:
1. It is one-component, moisture curing acetic silicone sealant
2. Easy to apply Excellent elasticity Fast curing
3. Excellent adhesion to most common building materials
4. Outstanding weatherproofing capability
5. Acetic Window & Door Silicone Sealant

Main Application:
1. General indoor glass cabinet installation
2. Indoor door and window wardrobe installation
3. Indoor glass joint sealing
4. Kitchen and bathroom sealing
5. Ceiling bonding and sealing
6. Other uses tested and applicable

How to use:
1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitability
of the product.
2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutes
after cleaning.
3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with the
surface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.
4. Suitable application temperature range 5°C to 40°C.

Warnings:
1. Use in a well-ventilated environment.
2. Use solvents in accordance with the appropriate safety regulations.
3. Keep the product out of the reach of children.
4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.

Executive Standard: GB/T14683-2017
 

No	Test Item		Unit	Actual results
1	Appearance		-	Smooth, no air bubbles, no lumps
2	Tack free time(at what % humidity)		min	4
3	Slump	Vertical	mm	0
		Horizontal	mm	Not deformed
4	Extrusion		ml/min	3928
5	Shore A hardness /72h		12-	12
6	Shrinkage		%	/
7	Effect of heat aging on		-
	- Weight loss		%	43.0%
	- Cracking		-	No
	- Chalking		-	No
8	Tensile adhesion		Mpa
	- Standard condition			0.4
	- Immersion in water			/
	- Dry at 100°C			/
9	Elongation at break		%	253
10	Specific gravity		g/cm3	0.95
11	Completely dry		hours	20
12	Temperature Resistence		°C	-50ºC~150ºC
13	Application Temperature		°C	4ºC~40ºC
14	Color			Transparent,Black,White,custmize color