Fornecedores com licênças comerciais verificadas
Fornecedor Auditado | Transmission Speed: | 10/100/1000Mbps | Wavelength: | 1310nm/1550nm |
|---|---|---|---|
| Connector: | SC FC ST | Distance: | 20KM |
| Fiber Type: | SM MM | Port Type: | SC/ST/FC And RJ45 |
| Product Certifications: | CCC, CE, CE, FCC, FCC, RoHS, RoHS | Power Output: | DC 5V 1A |
| High Light: |
electrical sfp module,fiber optic ethernet transceiver |
||
1. Plug and play, high performance, Low power consumption
2. Card-type or stand-alone, apply in centralized management 2U aluminum chassis
3. Cache is 512KB, MAC address table is 4KB
4. Complies with IEEE802.3 (10BASE-T) and IEEE802.3u (100BASE-TX/FX),Compliant IEEE802.3z/AB
1000Base-T,1000Base-SX/LX standards.
5. Electrical port supports Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
6. Automatic MDI/MDI-X crossover
7. Distances up to: 20 km Single Mode
8. SC optical connectors.
9. DC powered
10. In conformity with safety code of FCC, CE and RoHS.
Technical Specification
| Product Name | 10/100/1000M Single Fiber ,Single Mode, Fiber Media Converter |
| Standards |
IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.1af DTE Power via MDI |
| Wavelength | Single Mode: 1310nm,1550nm |
| Port | One RJ45 port, One Fiber(SC) |
| Network Media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or more UTP (≤100 meter) |
| Forward Mode | Store and forward |
| LED Indicator |
PWR: Green Illuminated to indicate unit is operating under normal operation copper device and flashes when data being sent / received fiber deviceand flashes when data being sent / received are being transmitted at 1000 Mbps |
| Power Supply | DC5V1A |
| Environmental requirements | Operating Temperature: 0°C~+70°C Storage Temperature: -45°C~+95°C Relative Humidity: 0~95% (non-condensing) |
| Transmission Distance | Fiber: Single Mode,20km; UTP: Cat.5/6, 100m |
| Diemension | 11cm*7cm*2.5cm |
1. Extend your Ethernet connection up to 0~25km away using fiber optics
2. Creates an economical Ethernet-fiber/copper-fiber link for connecting remote sub-networks to larger fiber optic networks/backbones
3. Converts Ethernet to fiber, fiber to copper/Ethernet, ensuring optimum network scalability for connecting two or more Ethernet network nodes (e.g. connecting two buildings on the same campus)
4. Designed to provide high-speed bandwidth for demanding large scale work groups that require expansion of Gigabit Ethernet Network
10/100/1000M Series Gigabit Converter
The 10/100/1000M Series 10/100/1000BASE-TX to 1000BASE-SX/LX
converter is primarily designed for larger and higher bandwidth demanding
workgroups that require expansion of the Ethernet network. The
10/100/1000M features Four RJ45 jack and a SC or SFP fiber optic
connector, connecting the 10/100/1000BASE-TX network to the
1000BASE-SX/LX (fiber optic) network. At full duplex mode, the converter
can extend distance up to 550 meters for Multi-mode fiber and up to 80
kilometers for Single-mode fiber. It is fully compliant with IEEE 802.3z &
802.3ab standards. The Installation & operation procedures of the
10/100/1000M Series are simple & straightforward. User can monitor the
real time operation status easily via a set of LED located in the front panel.
Cable Connection of 10/100/1000M Series Gigabit Converter
| Port type | Cable Type | Max.Length |
| 10/100/1000BASE-T | Cat. 5, 5E UTP, RJ-45 | 100 meters |
| 1000BASE-SX | Multi-mode Fiber of 850n (62.5/125µm) | 220 meters |
| 1000BASE-SX | Multi-mode Fiber of 850nm (50/125µm) | 550meter |
| 1000BASE-LX | Single-mode Fiber of 1310nm(9/125um) | 10-100km |
LED Indication
Please refer to the following table for LED indication of 10/100/1000M Series Gigabit Converter
| LED | Status | Indication |
| power | ON | The Power is on |
| lnk/act | Flash | F1:FX Data,P1 and P2:TP Data |
| speed | ON | The Speed is 1000M |
Specifications of 10/100/1000M Series Gigabit Converter
| MODEL | 1,10/100/1000M Series | 2,10/100/1000M Series | |
| STANDARD |
IEEE802.3ab 1000BASE-T; |
IEEE802.3ab 1000BASE-T; |
|
|
IEEE802.3z 1000BASE-SX |
IEEE802.3z 1000BASE-LX |
||
| INTERFACE |
RJ-45 part x 1 (10/100/1000 Mbps) SC connector Fiber port x 1 (1000 Mbps) |
||
|
TP CONNECTIONS |
10/100/1000BASE-T:UTP Category 5, 5E | ||
|
FIBER CONNECTIONS |
1000BASE-SX:62.5/125µm or 50/125µm Multi-mode fiber, SC/FC connector |
1000BASE-LX:9 or 10/125µm Single-mode fiber ,SC/FC connector |
|
|
LED INDICATIONS |
lnk/act,speed,power | ||
| MAX.DISTANCE | 550m/220m | 10km and 20km,100km | |
| ENVIRONMENT |
Operating Temp:0~+70ºC Storage Temp:-40~+85ºC Humlblty:10~90% non-condensing |
||
| POWER | 5V 2A | ||
| NET WELGHT | 500 g | ||
| EMISSION | FCC Class A, CE | ||
Typical Optical Power Budget
| 10/100/1000M Series | |||||
| Connector | SC | SC | SC | SC | SC |
| Wavelength | 850nm | 1310nm | 1310nm | 1310nm | 1550nm |
| Typical | 550m/220m | 10Km | 20Km | 30Km | 50-100Km |
| Min TX | -11dBm | -11.0dBm | -10.0dBm | -7.0dBm | -1~-6.0dBm |
|
Max TX PWR |
-3.0dBm | - 3.0dBm | -1.0dBm | 0.0dBm | 0.0dBm |
| Sensitivity | -18dBm | -21.0dBm | -21.0dBm | -24.0dBm | -24.0dBm |
|
Link Budget |
8.5dB | 12.0dB | 15.0dB | 19.0dB | 19.0dB |
Installation
As with any electric device, you should place the equipment where it will not be subject to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: Please follow the steps to install the media converter. This Converter is aplug-and-play device.
1. Turn off the power of the device/station in the network in which the media converter will be installed.
2. Ensure that there is no activity in the network.
3. Attach fiber cable from the media converter to the fiber network. The fiber connections must be Matched-Transmit socket to receive socket
4. Attach a UTP cable from the 1000Base-Tx network to the RJ-45 port on the product
5. Connect the power cord to the media converter and check if the power LED lights up. The TP Link and FX link LED will light when all the cable connections are satisfactory.
6. Turn on the power of the device/station.
Are you a trading company or manufacturer?
We are professional supplier. We are not only a trading company but also a manufacturer. Our factory name is Comelink co.,LTD
What are your main products?
Our products cover mainstream brands of OLT and PON cards, ONT ONUs, enterprise switches, optical modules and OEM ODN equipment.
Do ONT ONU products provide customized services?
Yes, we can customize your logo, company information, pre-configuration, packaging box, etc.
What is your delivery time?
Usually we can ship within 1-3 days for small quantity, and about 15-20 days for large quantity.
What are your payment terms?
Alipay, T/T, Western Union and Paypal. This is negotiable.
What is the shipping method?
Shipping by sea, air or express (EMS, UPS, DHL, TNT, FEDEX, etc.).
For OLT, how to ensure quality?
We conduct strict testing before shipment to ensure the goods are available, and electronic reports will also be shared with you. In addition, we also provide one-year warranty and technical service.
How do you make our business a long-term and great relationship?
We maintain good quality and competitive prices to ensure our customers benefit;
We respect every customer as our friend, and we sincerely do business and make friends with them, no matter where they come from.
Is there a minimum order quantity?
No, a test sample is also available.
Fornecedores com licênças comerciais verificadas
Fornecedor Auditado 
