Poly vinyl chloride Anti-UV PVC sheet pile Plastic Piling
PVC sheet piling is the pile with connecting locks for the building up of a solid protective wall. It is an analogue of Larssen steel sheet pile, but made of heavy-duty PVC (polyvinyl chloride) and is widely used in hydrotechnical and engineering construction. Possessing high mechanical resistance, it is stable to rotting, corrosion and rust, and the PVC characteristics allow to use it in aggressive environmental conditions.
Specification
|
Material
|
Width
|
Length
|
Thickness
|
Package
|
Color
|
|
PVC
|
457MM
|
Customization
|
11.18mm
|
Customization
|
Grey/customization
|
|
Material
|
Width
|
Length
|
Thickness
|
Package
|
Color
|
|
PVC
|
718MM
|
Customization
|
10mm
|
Customization
|
Grey/customization
|
VINYL SHEET PILE INSTALLATION
There are a large number of techniques to drive vinyl sheet piles. The system used largely depends on the circumstances. In some situations, particularly when short lengths of Plastic Piling are being installed, it can be inserted into the ground manually by using a maul and pile cap. This is often the case in peat land areas, where the ground conditions are more favorable. When installing longer lengths, or where the ground conditions are more difficult, a piling hammer should be used. Driving the sheet pile directly can be done with a standard pneumatic hammer or a light vibrator with or without a clamp. This system is only suitable for driving at light conditions and to a limited depth.
For heavy conditions and installation from 4m up to 8m depth, it is advisable to use a steel support sheet pile with exactly the same shape as the PVC profile. With support harder soil can be penetrated and installation is speeded up because the hammer does not have to be disconnected from the steel guiding sheet pile.
Advantage of Smallboss PVC Sheet Pile
√ Does not rot or rust
√ Manufactured from recycled plastic
√ Resistant to the majority of chemicals
√ Not affected by salt water
√ Light weight, easy handling
√ Reduced impact on natural resources
INSTALLATION CRITERIA
√ Sheet pile length.
√ Soil conditions.
√ Obstructions.
√ Onshore or offshore.
√ Water depth.
Application
CUT-OFF & CONTAINMENT SYSTEMS
Small boss Vinyl Sheet Piles are frequently the optimal solution for fluid containment projects. Vinyl PVC is a inert material that can exhibit superior chemical resistance, water corrosion resistance. The interlocks of the sheet pile can be coextruded with a sealing membrane that further improves cutoff performance. Applications include but are not limited.
to:
• Groundwater cut-off
• Chemical containment
• Fluid Seepage Barriers
• Protection of Foundation Structures
Flood protection structures
Vinyl PVC Sheet Piles can be utilized for flood protection structures as an:
• Flood Walls / Flood Levee
• Stabilization of Dams
• Protection of Piping
Vinyl Sheet Piles are frequently utilized to replace old corroded sheet pile structures as a superior alternative with superior corrosion resistance that is environmentally friendly.
WATER CONTROL SOLUTIONS
Vinyl PVC Sheet Piles can be utilized for water control structures that function by altering the flow of water in a pond, drainage channel or stream. PVC sheet piles have been utilized for water control applications for decades. Examples of utilizing vinyl sheet piles relevant to water control systems include:
• Baffle Walls for water or waste water flow control
• River Weirs
• Pond Linings
• Channel Linings for agricultural applications
• River Diversion
• Mining drainage systems
Small Boss Vinyl Sheet Piles are an eco-friendly material that is light-weight, aesthetic and very corrosion resistant.
MARINE STRUCTURES
Over the last 29 years Small boss has been delivering sheet piling solutions to marine structures. Vinyl PVC Sheet Piles provide an excellent option for a long lasting structural solution due to their superior corrosion resistance, aesthetic finish and lightweight profile for easy handling and installation. The marine applications
include:
• Marine Bulkheads & Seawalls
• Tide Walls
• Breakwaters
• Wave Breaks
• Jetty Structures
• Groins
• Scour Protection and Erosion Control
Construction site
R&D
Client feedback:
Factory visit
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 10-20 days if the goods are in stock. or it is 30-45 days if the goods are not in stock, it
is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge ,there are delivery cost to be paid by buyer.
Q: What is your terms of payment ?
A: T/T ,L/C .
Fornecedor Auditado 
