200kw 250kVA Ydn Biogas Generator Set

• Warranty: Three Years or 3000 Running Hours
• Tipo de saída: Trifásico AC
• Fonte Gás: Biogás
• Certificação: CE, ISO
• Poder: 50-200KW
• tensão nominal: 220 / 380 v.
• N ° de Modelo.: YDNC-200
• corrente nominal: 360A
• velocidade: 1500/1800 rpm
• frequência: 50 / 60 hz
• certificado: iso saso ce
• marca e-throttle: woodward
• marca do regulador: madas
• marca ecu: woodward
• marca de misturador de gás: woodward
• marca da vela de ignição: lanterna
• alternador: alternador sem escovas
• Pacote de Transporte: for Open Type, Packing with Plywood Case; for Sile
• Especificação: Gas engine
• Marca Registrada: YDNPOWER
• Origem: Weifang China
• Código HS: 8502390000
• Capacidade de Produção: 500 Sets /Month

Descrição de Produto

200kw 250kva YDN Biogas Generator Set
Genset Model			YDNC-200
Rated Power (kW/kVA)			200/250
Rated Current (A)			360
Dimension (mm)			2900*1100*2000
Gross Weight (kg)			3300
Biogas Engine	Brand		YDN
	Model		YDNT-855
	Configuration		Four-stroke,Water-cooling,Direct Injection,6L-type
	Rated Power (kW/kVA)		240/300(CH4 no less than 85%)
	Rated Speed (rpm)		1500
	Cylinder No.		6.L
	Bore*Stroke (mm)		140×152
	Cooling Method		Water cooling
	Oil Consumption (g/kw.h)		1
	Gas Consumption (m3/h)		≤60@100Load
	Starting method		24V DC
Gas control system	E-Throttle		BOSCH®(German Brand)
	MIXER		IMPCO®(USA Brand)
	Regulator		MADAS®(Italian Brand)
	Spark plug		TORCH®(China Brand)
	Water temperature		BOSCH®(German Brand)
Alternator	Brand		FARRAND
	Model		FLD-200
	Rated Power (kW/kVA)		200/250
	Material		High performance 100% copper
	Efficiency		94.50%
	Voltage Regulation		<=±1
	Voltage Regulation		Brushles, Self Excitation
	Insulation Class		H
Control System	Brand		SMARTGEN
	Model		HGM6110N
	Working Voltage		DC8.0V to DC35.0V, continuous
	Overall Dimensions (mm)		197*152*47
	Panel Cutout (mm)		186*141
	Working Condition		Temperature: (-25~70)ºC; Humidity: (20~90)%
	Weight		0.56kg

 

Requirments for natural gas

1.Methane should be at least 85%
2.The natural gas temperature should be between 0-60 ºC
3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
5. Gas pressure should be 8-14KPa, if the pressure is less than 3KPa, booster fan is necessary.
6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S<200mg/Nm3