Constant Voltage Source Output or Constant Current Source Output Signal Isolation D/a Conversion Module

• Costumização: Disponível
• Tipo condutivo: Circuito Integrado Bipolar
• Integração: GSI
• N ° de Modelo.: WJ203
• Tipo de Saída: Saída Atual
• Resolução: 10 Bit
• Forma: DIP
• Técnicas: Circuito integrado de semicondutores
• aplicações típicas: atuadores lineares para válvulas solenóides e proporcionais
• típico applications:1: rs232/rs485 fonte de alimentação programável industrial
• típico applications:2: rs485 sistema de controle de automação industrial de ônibus
• típico applications:3: controle de luz, controle de atenuação inteligente de LED
• típico applications:4: depuração e controle de operação de equipamentos
• típico applications:5: controlador linear para interruptor eletromagnético
• típico applications:6: controle de motor de corrente contínua e controle de avanço e reverso
• típico applications:7: bobina de propulsão eletromagnética ou carga de alta potência
• características do produto: controle de iluminação para visão computacional
• produto features:1: rs232/485 conversão isolada para 1 alta corrente si
• Pacote de Transporte: wayjunr
• Especificação: 106.7 mm x 79 mm x 25mm
• Marca Registrada: wayjunr
• Origem: Guangdong, China
• Capacidade de Produção: 100000

Descrição de Produto

RS485/RS232 signal conversion 0- ± 23V/0- ± 250mA constant voltage orconstantcurrent isolation driver WJ203

Product features:
RS232/485 isolated conversion to 1 high current signal output
Can set constant voltage source output or constant current source output
Supports adjustable ± 23V voltage or ± 250mA current output
The output has overcurrent and overvoltage protection as well as short-circuit protection
Voltage or current output accuracy better than 0.2%
Support setting the output voltage and current range
Can quickly cut off output by switching on/off input
Programmable calibration module output accuracy
Isolation and voltage resistance between signal output/communication interface/power supply 1000VDC

Wide power supply range: 10~32VDC
High reliability, easy programming, easy installation and wiring
Users can program module addresses, baud rates, etc
Supports Modbus RTU communication protocol and automatic recognition protocol
Low cost, small volume modular design
Typical applications:
Linear actuators for solenoid valves and proportional valves
RS232/RS485 industrial programmable power supply
RS485 bus industrial automation control system
Light control, LED intelligent dimming control
Equipment operation debugging and control
Linear controller for electromagnetic switch
DC motor control and forward/reverse control
Electromagnetic drive coil or high-power load
Machine vision lighting control

Product selection: WJ203 -  -  V /  mA Communication interface output voltage and current signal values 485: Input is RS-485 interface 232: Input is RS-232 interface
Selection Example 1: Model: WJ203-485-23V/250mA indicates RS-485 interface, 0- ± 23V signal output or 0- ±250mA signal output Selection Example 2: Model: WJ203-232-23V/250mA for RS-232 interface, 0- ± 23V signal output or 0- ±250mAsignaloutput

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

WJ203 Function Introduction:

WJ203 General Parameters:

The WJ203 signal isolation D/A conversion module can be used to output one current or voltage signal. 1, Analog signal output
12 bit output accuracy, all signal output ranges have been calibrated before the product leaves the factory. Duringuse, users can also easily program and calibrate themselves. 2, Communication Protocol
Communication interface: 1 standard RS-485 communication interface. Communication Protocol: Supports two protocols, the character protocol defined by the command set and the MODBUSRTU communication protocol. The module automatically recognizes communication protocols andcanachieve network communication with various brands of PLCs, RTUs, or computer monitoring systems. Data format: 10 digits. 1 start bit, 8 data bits, and 1 stop bit. The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can beset;
The communication network can reach a maximum distance of 1200 meters and is connected throughtwistedpair shielded cables. High anti-interference design of communication interface, ± 15KV ESD protection, communication response timelessthan 100mS. 3, anti-interference
Checksums can be set as needed. There is a transient suppression diode inside the module, which can effectivelysuppress various surge pulses, protect the module, and the internal digital filter can also effectively suppress power
frequency interference from the power grid.

(Typical @+25 ℃, Vs is 24VDC)
Output type: constant current output or constant voltage output, range 0~± 23V or 0~± 250mA
Accuracy: 0.2%
Temperature drift: ± 50 ppm/℃ (± 100 ppm/℃, maximum)
Output range: Current output 0~± 250mA
Voltage output 0~± 23V
Maximum output: current output of 250mA
Voltage output 23V
Output protection: output overvoltage protection, output overcurrent protection. Support switch signal to cut off output. Communication: RS-485 or RS-232 standard character protocol and MODBUS RTU communication protocol
Baud rates (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be selected by software
The address (0-255) can be selected by software
Communication response time: 100 ms maximum
Working power supply: 10~32VDC wide power supply range, with internal anti reverse and overvoltage protectioncircuitsPower consumption: less than 10W. Working temperature: -45~+80 ℃
Working humidity: 10~90% (no condensation)
Storage temperature: -45~+80 ℃
Storage humidity: 10~95% (no condensation)
Isolation and voltage resistance: Three isolation between communication interface/output/power supply: 1KVDC, 1minute,leakage current 1mA
Surge resistant voltage: 1KVAC, 1.2/50us (peak value)
Dimensions: 106.7 mm x 79 mm x 25mm
FAQ

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service